Dynojet Flow Meter Manual do Utilizador descarregar pdf (Página 14)

Flow Meter User Guide

FLOW METER

Flow Meter Testing

CHECKING TEST POINT THREE—PUMP INLET PORT, SENSOR SIDE

Test point three tests between the sensor block and the inlet port on the pump head.

The first part of test point three checks the flow through the filter and the sensor

block and the second part of test point three checks the sensor and sensor block for

leaks.

FILTER FLOW

1 Remove the pump inlet hose from the pump.

Note: The pump inlet hose is the wider hose inside the air pump.

2 Attach the pump inlet hose to the bottom port of the flow meter.

3 Attach the short hose, included with your flow meter kit, to the top port of the

flow meter.

4 Attach the other end of the short hose to the pump inlet port.

5Turn the air pump on.

6 Record the flow meter reading in a data table on page 16.

7Turn the air pump off.

Figure 7: Test Point Three—Filter Flow

top port

bottom port

pump inlet hose

short hose

pump inlet port

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Sem comentários

Dynojet Flow Meter Manual do Utilizador Página 14